Siemens LC258BA90 - Manual (Page 35)

35
The light can be switched on and off independently of the
fan.
1. Press the
0
button. The ”Light” area is selected
automatically.
2. Set the required luminosity with the rotary selector.
The selected luminosity is indicated on the display.
The timer runs independently of the extractor hood.
1. Press the
W button. The preset running time of the timer
is displayed.
2. The running time of the timer can be changed with the
rotary selector.
3. The time runs automatically.
The elapsing time is indicated on the display.
When the time has elapsed, a signal sounds. Press the
W
button to end the signal early.
Light
Set timer
Run-on: Light:
Level 7 Timer:
00:00 min s
12:45 Fan: Level 2
Run-on: Light:
Stufe 0 Timer:
05:00 min s
12:45 Fan: Level 2
Operation