Asus AP100 - Manual (Page 17)

AP100 Hardware Reference Guide 17
II. System Components
II. Components
Front Panel
Front Panel
The front panel needs to be removed to install or remove the device cage
covers for installing or removing devices mounted in the device cages. You
can remove the front panel either in the upright position or flat on its right
panel. Lean the front panel over the edge of a table or book if working
upright. Reach your fingers up into the front panel and pull the front panel
away from the chassis.
Device Bay Covers
With the front panel removed, the device bay covers can be removed or
installed.
Device Bay Removal Procedure:
1. With your thumb, push the tab out-
ward against the side of the front
panel.
2. With your other hand, push the
device cage cover inward from the
front side.
Device bay
cover tab
Front panel backside
Removing the front panel
Four of your fingers should
fit behind the front panel