Siemens DE08101 - Manual (Page 21)

21
en
Over-sink appliances
Attach mounting template ■ E to the wall.
Mark the locations for the holes; drill the holes ■
and insert the wall plugs.
Attach the installation bracket to the wall (
■ E1).
Pass the connection cable through the cable ■
grommet, suspend the appliance in the instal-
lation bracket and screw it onto the mounting
bracket (
E2).
Only for DE05101, DE06101, DE06111,
DE08101 and DE08111 (fixed electrical
connection)
The variants for feed through of cables using ■
flush mounting electrical connection should be
observed on the mounting template.
The cable grommet must completely enclose the
■
connection cable to guarantee optimum protec-
tion against dampness. The opening must be
sealed watertight if it is damaged.
Use the openings provided on the rear for
■
mounting.
E2
E1
E
50
100