Kenwood TM-281A User Manual
Page 71
64
12
1
DTMF tones are not transmitted in TX Mode if the
DTMF Lock function is ON.
2
When transmitting a stored DTMF number, press Mic
[PTT]+Mic [PF/D], release Mic [PF/D], then press a
Memory Channel number from 0 to 9. To transmit the
“D” tone, press Mic [PF/D] again.
3
On the display,
is represented by “E”.
4
On the display, is represented by “F”.
Note: When storing a Memory Name or Power-on message, the
DTMF keys can be used. Each time a key is pressed, the displayed
character will change, according to the table below.
1
Q
Z
1
2
A
B
C
2
3
D
E
F
3
4
G
H
I
4
5
J
K
L
5
6
M
N
O
6
7
P
R
S
7
8
T
U
V
8
9
W
X
Y
9
0
]
e
c
a
p
s
[
0
—
/
Key
Displayed Characters
MIC LOCK
The Mic Lock function disables the Mic PF keys to
prevent you from accidentally changing the transceiver
operation.
1 Press
[F], [MENU] and turn the Tuning control to
select Menu No. 34 (MC.L).
2 Press
[MENU] and turn the Tuning control to select
“ON” or “OFF” (default).
3 Press
[MENU] to store the setting or any other key to
cancel.
4 Press any key other than [MENU] to exit Menu Mode.
Note: The Mic Lock function will not lock the DTMF keys.