Kenwood TK-2360/3360 User Manual
Page 25
7
PTT ID
PTT ID is the transceiver unique ID code which is sent each
time the PTT switch is pressed and/or released.
COMPANDEr
if programmed by your dealer for a channel, the compander
will remove excessive noise from transmitted signals, to
provide higher clarity of signals .
BUSy CHANNEl lOCKOUT (BCl)
If BCL is set up by your dealer, you will be unable to transmit if
the channel is already in use. Use a different channel or wait
until the channel becomes free .
vOICE ANNOUNCEMENT
When turning on the transceiver power and when changing the
channel, an audio voice will announce the selected channel
and the channel’s Vox and scrambler settings .
QUIET TAlK (QT)/ DIGITAl QUIET TAlK (DQT)
your dealer may have programmed qt or dqt signaling on
your transceiver channels . a qt tone/ dqt code is a
sub-audible tone/code which allows you to ignore (not hear)
calls from other parties who are using the same channel.
STUN CODE
This function is used when a transceiver is stolen or lost.
When the transceiver receives a call containing a stun code,
the transceiver becomes disabled . the stun code is cancelled
when the transceiver receives a call with a revive code.