Kenwood TK-2360/3360 - Manual (Page 18)

0
n
Monitor Momentary
press and hold this key to deactivate qt or dqt signaling .
release the key to return to normal operation .
n
Paging
after selecting your desired Fleetsync channel, press this
key to transmit your ptt list id, to request a call .
n
Priority Channel Select
press this key to set the currently selected channel as
the Priority channel. During Scan, the transceiver will
automatically change to the Priority channel when a call is
received on that channel, even if a call is being received on
a normal channel .
n Scan
press this key to toggle scan on and oFF . While
scanning, the transceiver checks for a signal on each
channel and only stops if a signal is present .
n
Scan Temporary Delete
When scan pauses at an undesired channel, you can
temporarily remove that channel from the scanning
sequence by pressing this key .
n
Scrambler
press this key to toggle the scrambler function on and
OFF. The Scrambler allows you to hold conversations in
complete privacy by encrypting your transmitted signals .
n
Squelch Off
press this key to hear background noise . press this key
again to return to normal operation .