Avaya ABT-35H - Manual (Page 8)

rEGULATOrY nOTiCE 14 15
FCC rEQUirEMEnTS
PArT 15
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference,
and
2. This device must accept any interference
received, including interference that may cause
undesired operation.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception which can be determined by
turning the radio or television off and on, the user is
encouraged to try to correct interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on another
circuit.
• Consult the dealer or an experienced radio/TV
technician for help.
EXPOSUrE TO rADiO
FrEQUEnCY rADiATiOn
This device and its antenna must not be co-located
or operated in conjunction with any other antenna
or transmitter. To comply with FCC RF exposure
requirements, only use the supplied antenna.
The radiated output power of this internal
wireless radio is far below the FCC radio
frequency exposure limits. Nevertheless, the
wireless radio shall be used as described in the
manual.
The internal wireless radio operates within
guidelines found in radio frequency safety
standards and recommendations, which reflect
the consensus of the scientific community.
Plantronics therefore believes the internal
wireless radio is safe for use by consumers.
The level of energy emitted is far less than the
electromagnetic energy emitted by wireless
devices such as mobile phones. However, the
use of wireless radios may be restricted in some
situations or environments, such as aboard
airplanes. If you are unsure of restrictions, you
are encouraged to ask for authorization before
turning on the wireless radio.
NOTE: Modifications not expressly approved by
Plantronics, Inc. could void the user’s authority to
operate the equipment.
inDUSTrY CAnADA nOTiCE
Radio Equipment
The term “IC:” before the radio certification number
only signifies that Industry Canada technical
specifications were met.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2)
this device must accept any interference, including
interference that may cause undesired operation of
the device. “Privacy of communications may not be
ensured when using this telephone.”
This product meets the applicable Industry Canada
technical specifications of the RSS210.
AviS inDUSTriE CAnADA
Équipement radio
Le terme « IC/CI » avant le numéro d’homologation
radio signifie seulement que les spécifications
techniques Industrie Canada ont été respectées.
Le fonctionnement de l’équipement est soumis
aux deux conditions suivantes: (1) le dispositif ne
doit créer aucune interférence nuisible, et (2) le
dispositif doit accepter toute interférence reçue, y
compris celles pouvant causer le fonctionnement
indésirable du dispositif. « La confidentialité des
communications n’est pas assurée lors de l’usage
du téléphone. »
Ce produit répond aux spécifications techniques
du ministère de l’Industrie du Canada en vigueur
pour le RSS210.
rEGULATOrY nOTiCE