Steffy Wood Products 22" High Two Shelf Storage - Manual (Page 2)

BACK PANEL
TOP PANEL
BOTTOM PANEL
SIDE PANEL
DIVIDER
2
Slide the back panels into the
slots in the top, shelf and
bottom panels. The back panels
can be attached with the wood
grain on the inside or outside.
Be sure each panel is in the slot
on the assembled side.
3
Attach the remaining side panel
using the connector bolts and
hex key. Make sure the backs,
top, shelf and bottom panels are
in the slots in the side.
4
Attach the divider to the shelves
and bottom panel using the
connecting bolts and hex wrench.
Be sure the rounded edge is
facing front as you attach the
divider.
Go back and check to make sure
all connecting bolts are tight.
IMPORTANT
Check all bolts periodically
to make sure they are tight.
SHELF
BOTTOM PANEL
TOP PANEL
BOTTOM PANEL
SHELF
Rounded edge in front