Steffy Wood Products 35" High Two Shelf Storage - Manual (Page 2)

DIVIDER
ROUNDED EDGE DOWN
BACK PANEL
80010
SIDE PANEL
BACK PANEL
80006
CONNECTING BOLT
2
Attach the dividers to the bottom panel,
lower shelf and upper shelf using the
connector bolts and hex key. Be sure the
rounded, smooth edge is facing towards
the front of the cabinet.
3
Slide the back panels into the slots in the
top, upper shelf, lower shelf and bottom
panel. Be sure all panels are in the slots
in the assembled side panel. SLOTS FOR BACK PANELS
4
(right)
Attach the remaining side panel using
the connector bolts and hex key. Be
sure the back panels are completely in
the slots in the side panel.
CHECK ALL BOLTS
PERIODICALLY TO MAKE SURE
THEY ARE TIGHT!
CONNECTING BOLT
WARNING !!
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
Place heaviest items on bottom of cabinet.
Never allow children to climb or hang on doors or shelves.
Use of tip-over restraints may only reduce, but not
eliminate, the risk of tip-over.
5
Furniture tipping restraint hardware is included in
with the hardware package for this unit. Follow
the installation instructions printed on the restraint
hardware bag.