AT&T 882 - Manual (Page 48)

Appendices
44
AT&T 882 Manual
Change Password
Choose a password you can remember easily, but not
something that can be guessed by others. The default password
is 1234. The password can be up to 24 characters, letters or
numbers.
1 Press MENU .
2 Highlight “Change Password”
3 Press SELECT. You may be asked to type your old
password.
4 Type your new password and press ENTER or .
Rename Directory
See page 27 for steps to rename a directory.
Enter Home Phone Numbers
When you enter your home phone numbers, they appear on the
display after you press
SPEAKER , or lift the handset. If you
subscribe to Call Identification service, your area code must be
entered.
1 Highlight “Enter Home Phone Numbers”.
2 Press SELECT.
3 Enter your 3 digit area code , then press .
4 Enter the phone number for Line 1, then press .
5 Enter the phone number for Line 2, then press .
6 Press Done .
Caller ID
If ON and you subscribe to Call Identification Services, the
information will appear on the display. If you do not subscribe
to Caller ID, you may want to turn this OFF.
1 Highlight “Caller ID”.
2 Press SELECT to alternate between ON and OFF.
3 Press to move to next item or press the soft key below
Exit when you are done changing all settings.
6