AT&T 882 - Manual (Page 10)

Installation
6
AT&T 882 Manual
3 Setting Up the Phone
When the phone is first plugged into the power plug, the
ÒSet-UpÓ menu will appear. You may have to adjust the
Display Contrast. (see page 23)
Setting the Clock
1 SELECT “Set Clock ” from the Set-Up menu.
2 Enter the time then A for AM or P for PM.
3 Press .
4 Enter the current date.
5 Press .
6 When you are done press the soft key below Done.
Entering Your Home Phone Numbers
1 Highlight “Enter Home Phone Numbers”.
2 Press SELECT.
3 Enter your 3 digit area code , then press .
4 Enter the phone number for Line 1, then press .
5 Enter the phone number for Line 2, then press .
6 Press the soft key below Done .
Determining Line 1 and Line 2
If you have a two-line jack follow the procedure below to
determine which line is Line 1 and Line 2.
•
Press LINE 1 and call one of your phone numbers.
If you hear a busy signal, Line 1 is the number
you called. If Line 2 rings, it is the number you called.
One Phone Number Operation
If you have only one telephone number make line choice MANUAL .
1 Highlight “Line choice is”.
2 Press SELECT to alternate between AUTOMATIC
and MANUAL.
3 Press the soft key below Done when you are done changing
settings.
1