Videoswitch VS-200 - Manual (Page 5)

Videoswitch
VS-Series Desktop Switchers
4
3 Configuration Menu
To enter or exit the menu, hold down the SELECT key and then press the MENU (Camera 1) key.
To use the menu, press the
▲
and
▼
keys to move the pointer to the required item and then press the
SELECT key. Press the
▲
and
▼
and SELECT to modify settings as required. The menu options are:-
3.1 ◄ Back
Press SELECT on this item to exit from menu.
3.2 Auto Sequence List (Monitor A or B)
Choose which cameras will be included when auto-sequencing
3.3 Auto Sequence Time (Monitor A or B)
Specify the time in seconds for which each camera will be displayed.
3.4 Auto Sequence Mode (Monitor A or B)
Select either Sequential or Random sequencing mode.
3.5 Alarm Hold Time
Set the time in seconds for which each camera will be displayed following a new alarm.
3.6 Alarm Sequence Time
Set the time in seconds for which each alarmed camera will be displayed when multiple alarms are present.
3.7 Restore Camera after Alarm
Specify whether you want the camera prior to an alarm top be displayed again, or whether to displayed the
last alarmed camera.
3.8 Relay Hold Time
Set the time in seconds for which the relay will stay activated after all alarms have cleared.
3.9 Alarms Normally Open or Closed
Specify the sense of each alarm input. Unused inputs must be set to normally open.
3.10 Text Mode
Choose the appearance of the on-screen text (does not affect menu).
3.11 Camera Titles
Set 16 characters of text for each camera.
3.12 Screen Title
Set 16 characters of text for the screen heading.
3.13 Power Up States
Specify whether the switcher will auto-sequence following power-up.
3.14 Remote Control Address
This is used when switcher is controlled by a keyboard or computer.