Videoswitch Vi200 - Manual (Page 31)

Digital Recorder
25
9.3 Display
9.3.1 Keypad Brightness
The brightness of the backlit keypad may be adjusted here using the
UP and DOWN keys.
9.3.2 Auto Seq Dwell - Main
When auto-sequencing cameras on the main monitor (see section 7.8), the dwell time is
specified by this option using the
NUMBER keys.
9.3.3 Auto Seq Camera List - Main
Using arrow keys to select and deselect cameras from the list you may specify which
cameras are displayed during the main monitor auto sequence.
9.3.4 Auto Seq Dwell - Spot
When auto-sequencing cameras on the spot monitor (see section 7.10), the dwell time is
specified by this option using the
NUMBER keys.
9.3.5 Auto Seq Camera List - Spot
Using arrow keys to select and deselect cameras from the list you may specify which
cameras are displayed during the spot monitor auto sequence.
9.3.6 Camera Titles
Each camera may be given a title, or the default title may be used (“Camera1”, “Camera2”
etc).
You can use the
NUMBER keys for numbers and the UP and DOWN arrow keys to get
letters and other characters. Press the
BACK or LEFT key to go back to the previous
menu level. Or use the + and - keys to scroll through the units preset camera titles.