beautypg.com

J. preoperational instructions coin models – American Dryer Corp. AD-24 Phase 7 User Manual

Page 30

background image

26

American Dryer Corp.

113222 - 5

J. PREOPERATIONAL INSTRUCTIONS

COIN MODELS

1. Microprocessor Controller (Computer)

a. When the microprocessor controller (computer) is in the ready state, the liquid crystal display (L.C.D.)

screen will display “Ready, Insert $XX.XX (amount) to Start”.

b. Insert coin(s). Once the correct “Amount to Start” has been inserted, the L.C.D. will display “Select

Temperature”.

c. Select temperature by pressing “HI,” “MED,” or “LO.” The cycle will start and the L.C.D. will display

the Dry Cycle selected and the remaining time.

d. The dryer will continue through the drying and cooling cycles, until the vended time has expired.

NOTE: To stop dryer, open main door or press the “PAUSE” key. Continuation of the cycle will

resume only after the door has been closed and any of the three (3) temperature selection is
pressed.

e. Upon completion of the drying and cooling cycles, the tone (buzzer) will sound and the dryer will go into

the Anti-Wrinkle Mode for 99 minutes, or until the main door has been opened.

IMPORTANT: For more detailed information regarding the microprocessor controller (computer) on

your dryer, refer to the microprocessor user’s manual included with the dryer.

2. Mechanical Drop/Rotary Coin Meter or Slide Coin Meter

a. Insert coin and turn knob (rotary type meter), or for slide meter unit, push in coin chute.

b. Select Temperature.

c. Push the “Start” button.

d. To stop dryer, open the main door.