VariZoom VZSNAPCRANE9-100 - Manual (Page 2)

2
Parts List
Crane Arm Sections
1) Tail Section (short) w/ sliding micro-adjust counterweight
2) Pivot Section w/ half-moon shaped brake plate
3) Front Section (short) w/ “VariZoom” Logo
Support Sections
4) Camera Platform
5) Pan/Tilt Mounting Base for Crane Arm (“fulcrum”)
6) Tripod
7) Dolly
Cables (individually labeled)
10) Cable 3 (black)
11) Cable 4 (black)
Other Parts
12) Weight Bar (24” long stainless rod)
13) Plate Adapter (round, domed)
14) Braided Sleeving (for video/power cables)
SNAPCRANE MODE GUIDE
Compact Mode (front pivot hole, use black cable 4)
Arm Sections used: Front and Pivot sections only
Camera capacity: up to 50lbs.
Unit weight: 36 lbs.
Folded length: 55”
Overall length: 7’3”
Distance from tripod to camera: 5’8”
Vertical movement / Max Height: 8’ / 9’9”
Mid-Size Mode (rear pivot hole, use black cable 3)
Arm Sections used: Front, Pivot, and tail sections only
Camera capacity: up to 50lbs
Unit weight: 46 lbs.
Folded length: 55”
Overall length: 9’3”
Distance from tripod to camera: 6’6”
Vertical movement / Max Height: 9’ / 10’9”
***One hardware set supplied for all 5 black cable lengths. To switch hardware: pull the Quick Release pins
and remove the hardware from the cable, then attach to the appropriate-length cable.
Note: Vertical Movement is measured to camera platform, while “Max Height” is measured to overslung MC100 platform