VariZoom SOLO JIB CF KIT - Manual (Page 7)

If you keep your hands on the jib, you
may be able to operate it without the
tilt or pan brakes tightened. If you need
to take your hands off the jib, you may
want to tighten the tilt and/or pan
brakes to hold position. These brakes
are not hard-stop mechanisms, they are
soft-stops that can be pushed-through.
The most important thing to always remember when operating the jib is safety. Make sure
all camera, jib and tripod mounting and adjustment points are tightened. Do not swing
the jib over the heads of people or through crowds. If you have any questions, contact
us. Thanks!
www.varizoom.com
Accessories for the Solo Jib
SOLOGRIP – accessory grip for tail of Solo
Jibs, also allows mounting lens controller
VZ-TK75A - tripod
SOLOSLIDERDOLLY – track dolly system
VZ-M7 – monitor
VZ-MICROARM – articulated mounting arm
CHICKENHEAD – fluid pan/tilt head
Optional Solo Slider Dolly and VZ-TK75A
shown to right
Watch the Video Here: http://www.youtube.com/watch?v=M6dRv1vBr7g#t=52