VariZoom VZSTEALTHPZFI - Manual (Page 2)

interface. These are limitations of the camera’s remote circuit design, and should be
kept in mind if you intend to switch between auto and manual focus modes regularly.
6. IRIS CONTROL – Operating the iris control is fairly simple – you do not need to set
anything on the camera first. Note that the ROCK-PZFI’s iris dial allows the operator to
adjust iris to a limited extent even when the remote is set to auto iris ‘A’. To adjust the iris
manually through the full range of F-stops, simply set the remote iris switch to ‘M’ and turn
the iris dial. Switching it back to ‘A’ will cause the camera to take over and slowly adjust
the iris automatically to an appropriate level. Note that when you switch back to ‘M’ on
the remote the camera will reset the iris to the position dictated by the iris dial (the same
as with the focus dial).
Care and Maintenance of the VZ-STEALTH-PZFI
Although the unit is designed to easily withstand normal wear and tear, it should be cared for
and protected just like your camera. As normal precautions, avoid dropping or crushing the
unit and try to keep it as dry as possible. While it can withstand some of this type of
treatment, it will last longer and operate consistently if you take these precautions. If you
have any problems or questions, feel free to email or call us.
Warranty Info: Do not open your control device, as this may void your warranty and possibly damage the
control. If you need service, contact VariZoom for a Return Merchandise Authorization (RMA #). All controls
have a 2-year parts and labor warranty. Please save your receipt and send us your comments and suggestions.
Thanks!
www.varizoom.com / 888-826-3399