ASKO W6441 - Manual (Page 15)

Page 15
P1 P2 P3 P4
Menu Enter
Start
Stop
P1 Light wash
P2 Light wash
P3 Quick wash
P4 Hand wash
P1 P2 P3 P4 Start Stop 105˚ 43
rpm
1400
Model W6761 has ASKO’s state-of-the-art
EasyControl™ panel, as illustrated below. To select a
wash program, simply press one of the preset program
Door Open Button
Press to open the glass door.
Preset Programs
Press one of these buttons to
select a program.
LCD Window
Displays the wash program, spin speed,
temperature settings, and program run time.
Power Button
Press to turn on power to
the machine.
Program Selection Controls
These buttons allow you to customize the preset program settings,
such as wash temperatures, spin speed, rinses, display language,
etc. Refer to pages 18–20 for instructions.
Power Indicator
Light
Glows when the power
is turned on.
Start/Stop Button
Press to start or stop/
interrupt a program.
THE CONTROL PANEL
W6761 OPERATING INSTRUCTIONS
buttons then press Start. Refer to “Preset Programs” on
the next page for a definition of these programs.
POWER BUTTON
The Power button turns the power to the machine on
and off. When the power is on, the power indicator light
glows red. The power must be on before you can open
the glass door, set the programs or start the machine.
START/STOP BUTTON
Once you’ve selected a program and options, press this
button to start the washer. You also press this button to
stop the washer during a program.
DOOR OPEN BUTTON
When the washer has completed a program, press this
button to open the glass door. Note that the power must
be on and the unit must be at the end of a program and
the water drained before the door will open.
UNDERSTANDING THE LCD WINDOW
rpm
Spin speed for the selected
program.
Program Time
When you start a program, the total
time the program runs is displayed.
As the program progresses, the time
remaining displays. The program
time toggles between the hours (e.g.,
1h) and the minutes (e.g., 22).
Temperature
Wash temperature for the selected
program.
Stop
Indicates that the program has ended or
that you pressed Stop.
Start
Indicates that you pressed Start and
the program is running.
Preset Programs
Displays the program that is
selected/running.
Program
When you press the Power
button, the display toggles
between the program numbers
and the wash program names,
(e.g., Normal, Super quick,
etc.)
Door Open
Displays when you press the
Door Open button.
The LCD window is easy to read and understand. It displays the wash program selection along with the wash temperature,
spin speed, and program run time. The illustration below explains each item on the LCD window.
WARNING! To reduce the risk of electric shock or injury to persons, read the ”Important Safety
Instructions” section on page 2 before operating this appliance.
NOTE: For instructions on how to open the door
manually in case of power failure, see page 24.
INTERRUPTING OR CANCELLING A
PROGRAM
To interrupt a program to add an item to the wash, press
and hold the Door Open button until the unit stops (about
3 seconds). The machine will stop and the water will be
pumped out before the door will open. Add the item to
be washed and, if necessary, add more detergent. When
you close the door, the unit will start at the point it was
interrupted.
To cancel a program, press and hold the Start/Stop
button until the unit stops (about 3 seconds). Press Door
Open. If there is water in the unit, it will drain before the
door will open. If you stop a program this way, you will
have to reselect a program and press Start/Stop to restart
the machine. The program will start from the beginning.