HighPoint RocketStor 5122R - Manual (Page 17)

17
2) Replace the failed device. The replacement hard disk/SSD must be equal to or larger than the failed
device.
3) Once the disk is attached, allow the RocketStor a few moments to detect the replacement. You can also
use the “Rescan” button to expedite this process.
4) Once the replacement disk is detected, it will be displayed under External Drive Information. Click “Add
Disk”.
This will open the Add Disk To Array menu.
5) Check the circle before the replacement disk and click “Submit”. The RocketStor will initiate the rebuild
procedure.
6) The RocketStor interface will notify you when the rebuild procedure is complete. The status will be
restored to “Normal”.