HighPoint RocketRAID 2640X1 - Manual (Page 28)

HighPoint RAID Management and Device Driver CD
28
4. The package can also be installed manually, using a terminal. Log in as “root”,
open a terminal, and browse to the location of the .rpm file. Run the following
command:
5. # rpm -i hptsvr-https-1.4-8.i386.rpm (or hptsvr-https-1.4-8.x86_64.rpm)
Note: The i386 rpm package can also work on 64-bit systems if you have 32-bit
runtime libraries installed. If you use the x86_64 rpm package, please make sure the
controller driver has 64-bit ioctl support.
If there is no /etc/hptcfg present, you can add it manually using by using the “echo”
command on the driver file name to /etc/hptcfg.
For example:
# echo rr26xx.ko >/etc/hptcfg
Uninstalling the Utility
Open a terminal, and use the following command:
# rpm -e hptsvr-https
Other Distributions
For Debian/Ubuntu Linux distributions, you can use alien to convert the rpm pack-
ages to a .deb package, then use “dpkg -i” command to install each package. Some
script files may be lost during the conversion process from rpm to .deb, so you may
need to make manual corrections.
The following files will be installed/configured:
/usr/bin/hptsvr - service program
/etc/hptcfg - service config file
/etc/rc.d/init.d/hptdaemon - service control script
/usr/share/hpt/webguiroot - data files