HighPoint RocketRAID 2760A - Manual (Page 39)

39
5 - Web GUI - Configuring Spare Disks
The term “Spare Disk” refer s to a hard disk, or dedicated disk space, that is used to rebuild a RAID array in
the case of hard disk failure. If free ports/channels are available, spare disks are ideal for minimizing g
downtime – the administrator does not have to work directly with the storage devices, nor install or remove
any additional hardware in order to rebuild parity.
Spare disks can be created from available hard disks (disks that have been initialized) or free disk space
(unallocated space on a set of RAID disks – leftover space not assigned to an active array).
To configure Spare Disks, select Manage – Spare from the utility tool bar:
To assign a Spare disk:
1) Click on the box displayed before the target disk entry, under the Available Disks section, and
click the “Add Spare” button: