Ejecting a disc from the drive – Asus Network Device CRW-3212A User Manual

Page 15

Text mode
Original mode

ASUS CRW-3212A User’s Manual

3. Press the drive eject button or lightly push the center of the drive tray

to replace the tray inside the drive.

Ejecting a Disc from the Drive

1. Press the eject button on the front of the drive to eject the tray.

2. Carefully remove the disc from the tray.

3. Press the drive eject button or lightly push the center of the drive tray

to load the tray back into the drive.

12-cm
Disc

8-cm
Disc

NOTE:

If you are using a 12-cm disc, place it on the tray making

sure that it fits the outer circular border. This border helps hold the
disc in place. If you are using an 8-cm disc, place it on the inner
circular border on the tray.