Aspire Digital 7520 - Manual (Page 45)

Chapter 2 39
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if
you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4
Troubleshooting when problem arises.
To activate the BIOS Utility, press
m
during POST (when “Press to enter Setup” message is prompted
on the bottom of screen).
Press m to enter setup. The default parameter of F12 Boot Menu is set to “disabled”. If you want to change
boot device without entering BIOS Setup Utility, please set the parameter to “enabled”.
Press during POST to enter multi-boot menu. In this menu, user can change boot device without
entering BIOS SETUP Utility.
InsydeH20 Setup Utility Rev. 3.0
CPU Type : Intel (R) Core(TM)2 Duo CPU T7300
CPU Speed :
System BIOS Version: V0.18.T04
VGA BIOS Version: ATI
Serial Number:
Asset Tag Number:
Product Name:
Manufacturer Name:
Acer
UUID: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
F1 Help Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
HDD Model Name : ST980811AS
ATAPI Model Name : TOSHIBA DVDW/HD TS-L802A
HDD Serial Number : xxxxxxxxxxxxxxxxxxxxxx
2.00 GHz
Information Main Security Boot Exit Advanced
ATAPI Serial Number: xxxxxxxxxxxxxxxxxxxxxx
HDD Model Name : ST980811AS
HDD Serial Number : xxxxxxxxxxxxxxxxxxxxxx
System Utilities
Chapter 2