Wixey WR100 Type 2 DIGITAL CALIPERS with FRACTIONS User Manual
Wixey Tools
Wixey
DIGITAL CALIPERS with FRACTIONS
MODEL WR100 Type 2
INSTRUCTIONS
Measurements:
Functions:
•
ON/OFF- turns the power completely on or off. When turned ON, the
calipers set to 0.00.
•
IN/MM- toggles from decimal inches with fractions to millimeter.
•
ZERO- sets display to 0.00 at any position
•
Auto shut off- turns power off automatically after 30 minutes and
retains calibration. After 4 hours turns off completely.
Battery Replacement and Trouble Shooting:
For questions, comments, and more information go to: www.wixey.com
Problem
Possible
Cause
Solution
Flashing Digits
Low
Voltage
Replace Battery
No Display
Low
Voltage
Replace Battery
No Display
Bad
Contact
Clean Battery
Erratic or
Frozen Display
Internal
Error
Remove Battery
Wait 1 Minute
and Replace