Alpine CDE-9845 - Manual (Page 10)

9
-EN
Scanning Programmes
Press 6 ( ) to activate the Scan mode.
The first 10 seconds of each track (file) will be played back in
succession.
To stop scanning, press 6 ( ) and deactivate the Scan
mode.
Searching CD Text (CDE-9845/CDE-9843 only)
Tracks can be searched and played using the CD text on the disc. In
the case of discs that do not support text, searches can be made using
the track numbers.
1
Press during play.
This will set the search mode.
2
Turn the Rotary encoder to select the desired
track, then press the Rotary encoder.
This will play the selected track.
• Press and hold for at least 2 seconds in the search mode to
cancel. Or, the search mode will be cancelled when an operation
has not been performed in 10 seconds.
• CD text search cannot be made during M.I.X. play.
Repeat Play
Press 4 ( ) to play back repeatedly the track being
played.
The track (file) will be played repeatedly.
Press 4 ( ) again and select OFF to deactivate repeat play.
CD mode :
RPT : Only a track is repeatedly played back
↓
(off)
MP3/WMA mode (CDE-9845 only):
MP3 mode (CDE-9843 only):
RPT : Only a file is repeatedly played back
↓
RPT : Only files in a folder are repeatedly
played back
↓
(off)
M.I.X. (Random Play)
Press 5 ( ) in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5 ( ) again.
CD mode :
↓
M.I.X. : Tracks are played back in
random sequence.
↓
(off)
MP3/WMA mode (CDE-9845 only):
MP3 mode (CDE-9843 only):
↓
M.I.X.: Only files in a folder are played back in
random sequence.
↓
M.I.X.: Files are played back in random sequence.
↓
(off)