Racing Electronics SC200 User Manual
Page 24
5.
Select the character using VFO Control. Turn clockwise
to move 0 - 9, A - z and other characters and stop the
control at the letter you wish to store.
6.
Repeat the steps 4 and 5 for all the characters you want
to program.
7.
When you complete the input, press
. The words
you have programmed flash twice.
Alert Beep Setting
When a transmission occurs on a channel on which you
have set the Alert Beep function, 2 beeps will let you know
that your “favorite” channel has been received.
You can set this function for each channel. Select a
channel, then press and hold
/
ALERT to set this
function on a channel in Manual mode.
appears on the display. (Except in Alpha Name display
Mode)
You cannot set this function for the channels which have
not been programmed before.
22