Pure Highway H260DBi - Manual (Page 14)

14
Using Bluetooth
Highway’s Bluetooth feature allows you to use
Highway’s microphone and your car’s built in audio
system to make handsfree phone calls. Once
connected, you can also use Highway’s display to
retrieve contact details and view information about
incoming, outgoing and missed phone calls.
If your mobile phone is capable of storing audio
files, you can also use Bluetooth to stream any
music stored on your phone to Highway.
Notes:
• Do not install Highway’s microphone in noisy
areas within your vehicle, such as near the air
vents.
• Do not place your Bluetooth handsfree device in
places where it can be exposed to direct sunlight
as high temperatures may affect Highway’s
performance.
• Highway may not be compatible with some
mobile phones and Bluetooth audio players.
• Audio playback will be set to the same volume
level set during a telephone call.
Pairing your mobile phone with Highway
Before you can use Highway’s Bluetooth function,
you will need to pair your mobile phone with
Highway.
1. Turn on your mobile phone’s Bluetooth function.
2. Enter your mobile phone’s Bluetooth setup
menu.
3. Search for new Bluetooth devices.
4. Select
Pure H260DBi from the pairing list on the
mobile phone.
After pairing successfully, the BT and HFP icons
will light up on Highway.
The A2DP icon will light up to indicate that music
can be streamed from your Bluetooth device to
Highway.
Auto connection
1. Highway can pair and store a maximum of five
mobile phones.
Auto connection will be enabled once you have
paired your mobile phone with Highway.
2. Your mobile phone will need to be switched on
to use the auto connection function.
3. The auto connection function will only work with
the last mobile phone that you connected to. If
you want to connect another mobile phone, you
will need to connect manually.
Using the handsfree telephone function
Accessing the Bluetooth menu
Toggle the SOURCE button to switch the source to
“
BLUETOOTH”.
Press the MENU / button to select a way to
make outgoing call.
Dialling a number
1. Press the MENU /
button.
2. Turn and press the VOLUME dial on the front
panel to select ‘DIAL NUMBER’.
3. Turn and press the VOLUME dial to select the first
number of the phone number that you want to dial.
Repeat until you have entered the whole phone
number.
4. Press the BAND / button to dial the phone
number.
When you have finished your phone call, press the
MENU / button to hang up.
Answering a call
Press the BAND / button to answer an incoming
call.
To reject an incoming call press the MENU /
button.
Ending a call
When you have finished your phone call, press the
MENU / button to hang up.