Pure Evoke D2 with Bluetooth - Manual (Page 17)

15
EN
Clock settings
Setting the time and date
The time and date on Evoke are automatically set by the FM or digital radio signal. If the time/date does not
update automatically, you can manually set it using this option.
Note: Any time or date updates received by an FM or a digital broadcast will override manual settings, if
clock synchronisation is enabled (see the following page for more information).
Setting the time and date manually
1. Press Menu and turn and press the Select dial to choose ‘Clock’.
2. Turn and press the Select dial to choose ‘Set Time/Date’.
3. Turn and press the Select dial to set the hour. Repeat to adjust the minutes.
4. Turn and press the Select dial to set the day of the month. Repeat to set the month and year.
Changing the time format
1. Press Menu and press the Select dial to choose ‘Clock’.
2. Turn and press the Select dial to choose ‘Set 12/24 hour’. Repeat to set the required time format.
Changing the date format
1. Press Menu and turn and press the Select dial to choose ‘Clock’.
2. Turn and press the Select dial to choose ‘Set date format’. Repeat to set the required date format.
Clock synchronisation options
You can select the radio sources that you want to use for setting the time. By default, Evoke uses both the
FM and digital radio signals to synchronise the time.
1. Press Menu and turn and press the Select dial to choose ‘Clock’.
2. Turn and press the Select dial to choose ‘Clock synch’.
3. Turn and press the Select dial to choose the required clock synchronisation option and press Select.
Changing the alarm snooze time
1. Press Menu and press the Select dial to choose ‘Clock’.
2. Turn and press the Select dial to choose ‘Set snooze time’.
3. Turn and press the Select dial to choose a snooze time between 5 and 59 minutes.