Pure Elan DX20 - User Guide - Manual (Page 12)

9
DRC value
DRC (Dynamic Range Control) value makes the quieter sounds in a broadcast easier to hear
at low volume or in a noisy environment. The DRC level of a broadcast is set by the station
and sent with the signal. At the time of writing in the UK only BBC Radio 3 and 4 regularly use
DRC. Check with the broadcasters to find out if they use DRC on their stations. Press the +/-
buttons to scroll through the following options and push Select to choose one:
DRC 0
DRC is switched off. Any DRC level broadcast will be ignored.
DRC ½ DRC level is set to ½ that sent with the broadcast.
DRC 1 Applies the DRC level as sent with the broadcast.
Sw version
Displays the version of the software in your radio. You may be asked to quote this if you
contact Technical Support.
DRC 1
DRC 0
DRC value
Sw version
V 1.0
Software version