Using the alarm, Setting an alarm – Pure Move 400D User Manual
Page 11

9
Using the alarm
The alarm in Move switches the radio on (if in standby) and tunes to a
digital or FM radio station or sounds a tone.
Setting an alarm
1. Press
Menu.
2. Scroll
< > to ‘Alarm’ and press Select.
3. Scroll
< > to ‘On’ and press Select.
4. Scroll
< > to set the hour for the alarm and press Select. Repeat
to set the minute for the alarm.
5. Scroll
< > to specify one of the following alarm repeat options:
‘Daily’, ‘Weekdays’, ‘Weekends’ or ‘Once’ and press Select to
confirm.
6. Scroll < > to specify ‘FM’, ‘Digital radio’, or ‘Tone’ and press
Select to confirm. If you are specifying a tone alarm, skip to step 9.
7. Scroll < > to specify which station should be played when the
alarm goes off. You have the option of selecting one of your preset
stations or you can select ‘Last Used’ to select the station that you
were last listening to. Press Select to confirm.
8. Use < > to set the volume that the radio will play at when the alarm
sounds and press Select to confirm.
9. The alarm icon will appear on the display to show that the alarm is
set.
DR
ST
FM
Alarm
DR
ST
1Xtra - BBC
Bringing you