Pure Contour i1 Air - Manual (Page 19)

17
Using the alarm
Contour i1 features an alarm which you can set to sound a tone or play a track
from your iPod/iPad/iPhone.
Setting an alarm
Press the Alarm button on the remote to show the
status of the Alarm.
Press the or buttons and
Select to adjust the
following settings:
Alarm on/off
Press or to choose between ‘ON’ (alarm sounds)
or ‘OFF’ (alarm does not sound) and press
Select.
Set Time
Set the alarm time. Press or to adjust the hours
then press
Select. Repeat to set the minutes then
press Select.
Set Days
Set the days that the alarm sounds. Press or to
choose between: DAILY (every day), ONCE (no repeat),
WEEKDAYS (Monday to Friday), WEEKENDS, EVERY
SATURDAY or EVERY SUNDAY then press
Select.
Set Mode
Press or to choose between: IPOD or TONE
(buzzer).
Note: To set an alarm that plays a track, you will need
to dock an iPod/iPad/iPhone that contains music into
Contour. If a track was playing before the alarm was
set it will resume from the point that the track was paused.
Volume
If you’ve set alarm mode as iPOD, press or to
change the alarm volume then press
Select.
You will see the message ‘SAVED’ once you have
completed all the alarm settings.
The icon on the screen indicates when an alarm is
set.
DAILY
IPOD
ON
ON
SAVED
Contour_i1_Air_manual_Aus_v1.indb 17 7/29/2013 4:29:54 PM