Using the auxiliary input, Using the sleep timer – Pure Contour i1 Air User Manual
Page 18

16
Using the auxiliary input
Connecting an auxiliary device
Connect the line out or headphone socket of your auxiliary device to the Aux In
socket on your Contour using a suitable cable.
Selecting the auxiliary input
Press Source until Aux is displayed on the screen.
Using the sleep timer
The sleep timer switches Contour into standby after a number of minutes has
elapsed.
Setting the sleep timer
1. Press the
Sleep button.
2. Press the
< > buttons to specify the duration of the sleep timer from 15 to 90
minutes.
2. Push
Select, or wait to start the sleep timer.
The icon on the screen indicates when the sleep timer is set.
Tip: Push the Sleep button again at any time to view the time remaining.
Cancelling the sleep timer
Press the
Sleep button and set the timer duration to OFF.
12V DC
Wi-Fi
Setup
Aux In
Ethernet
Contour_i1_Air_manual_Aus_v1.indb 16
7/29/2013 4:29:53 PM