Pure Jongo A2 - User Guide - Manual (Page 9)

7
Switching between Sleep, On and Off
Jongo has three power states, Sleep, On and Off. In Sleep, Jongo remains connected to the
wireless network and waits to receive audio.
To enter Sleep, briefly press the
Power button (Power light turns amber).
Once in Sleep, press the Power button to switch to On (Power light turns green).
To turn Jongo off, hold the Power button until the Jongo power light turns red, then release.
Connector on Jongo Cable Output
Analogue audio Dual phono to 3.5mm,
dual phono to dual phono DAC-processed hi-fi audio
Digital coaxial out Phono to phono Raw digital audio
Digital optical out TOSLINK Raw digital audio
Choosing your audio connection
Note: Audio output is dependant on the source file quality.