American Audio DIGI-PRO - Manual (Page 21)

BASIC OPERATIONS (CONT.)
American Audio ® • DIGI-PRO™ INSTRUCTION MANUAL • PAGE 21
14. CREATING AND PLAYING A SEAMLESS LOOP
A seamless loop is a sound loop that plays continuously without sound interruption. You can use this loop to
create dramatic effect in your mixing. This loop has no time limit and you could actually loop the entire length
of disc. You create a seamless loop between two continuous points of a disc. The following steps illustrate
the procedures for creating a seamless loop:
2) Press the IN REAL-TIME CUE BUTTON (26). This will set a
loops starting point. The IN REAL-TIME CUE BUTTON (26) LED
will briefly indicating a starting point has been set.
1) Press the PLAY/PAUSE BUTTON (29) to activate
playback mode.
Figure 22
Figure 23
2) At this point pressing any one of the four CUE BUTTONS
(6) will store your cue point into memory (Figure 21), and the
yellow Cue Memory LED will shut off.
3) Repeat steps one and two to store up to four Cue Points.
Once all your four cue points have been stored you may
access them at any time.
4) During playback the cue points will instantly start without any
music interruption. During play or pause mode accessing a
stored cue point will cue to that point in pause mode.
Figure 21