American Audio DIGI-PRO - Manual (Page 12)

GENERAL FUNCTIONS AND CONTROLS - PLAYER UNIT
B. TRANSPORT UNIT (FIGURES 3)
35. DRIVE 1 TRANSPORT TRAY - This tray is
used to load and load compact disc in to the drive
1 mechanism. The tray is opened and closed by
pressing the
DRIVE 1 OPEN/CLOSE BUTTON
(36). Never attempt to force the transport tray
open or closed when the power is turned off.
36. DRIVE 1 OPEN/CLOSE (Transport Tray
Open/Close) - This button is used to open and
close the drive 1 transport tray. NOTE: When a
disc is already loaded in the transport tray, the
tray will not open unless the unit is in pause or
cue mode.
37. POWER SWITCH - This switch is used to
control the unit's main power. A blue LED directly
above the power switch will glow to indicate main
power is active.
38. DRIVE 2 OPEN/CLOSE (Transport Tray
Open/Close) - This button is used to open and
close the drive 2 transport tray. NOTE: When a
disc is already loaded in the transport tray, the
tray will not open unless the unit is in pause or
cue mode.
39. DRIVE 2 TRANSPORT TRAY - This tray is
used to load and load compact disc in to the drive
2 mechanism. The tray is opened and closed by
pressing the
DRIVE 2 OPEN/CLOSE BUTTON
(38). Never attempt to force the transport tray
open or closed when the power is turned off.
40. SCRATCH BOX INPUT (Drive 2)- This jack
is used to receive the digital
Scratch Box signal.
Use the included stereo mini plugs to connect the
Scratch Box to the to this jack. Be sure to use
a dual stereo jack for proper functionality. For
more information on the
Scratch Box refer to the
Scratch Box manual.
36 37 39 35 38
CONNECT TO
CONTROL 2
CONNECT TO
CONTROL 1
SCRATCH BOX
INPUT
115V 230V RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION
DIGITAL
OUT
SCRATCH BOX
INPUT
DIGITAL
OUT
AUDIO OUT
L R
AUDIO OUT
L R
Voltage Selector
AC INPUT 115/230 V, 50/60 Hz
2 1
41 43 44 45 42 46 47 48 49 40
© American Audio ® - www.americandj.com - DIGI-PRO™ Instruction Manual Page 12