Outback Power Systems HUB-10 System Communication Manager User’s Manual - Manual (Page 15)

14
TWO YEAR LIMITED WARRANTY INFORMATION
Hub Communications Manager Products
OutBack Power Systems, Inc. (“OutBack”) provides a two year (2) limited warranty (“Warranty”) against
defects in materials and workmanship for its Hub Communications Manager Products (“Product(s)”) if
installed in fi xed location applications.
The term of this Warranty begins on the Product(s) date of manufacture or the initial purchase date as
indicated on the warranty registration card submitted to OutBack, whichever is greater. This Warranty
applies to the original OutBack Product(s) purchaser, and is transferable only if the Product(s) remains
installed in the original use location. The warranty does not apply to any Product(s) or Product(s) part
that has been modifi ed or damaged by the following:
• Installation or Removal;
• Alteration or Disassembly;
• Normal Wear and Tear;
• Accident or Abuse;
• Corrosion;
• Lightning;
• Repair or service provided by an unauthorized repair facility;
• Contrary to manufacturer product instructions;
• Fire, Floods or Acts of God;
• Shipping or Transportation;
• Incidental or consequential damage caused by other components of the power system;
• Any product whose serial number has been altered, defaced or removed; or
• Any other event not foreseeable by OutBack.
OutBack’s liability for any defective Product(s), or any Product(s) part, shall be limited to the repair
or replacement of the Product(s), at OutBack’s discretion. OutBack does not warrant or guarantee
workmanship performed by any person or fi rm installing its Product(s). This Warranty does not cover
the costs of installation, removal, shipping (except as described below), or reinstallation of Product(s).
Revision.2008-04-01