Night Owl CS-Alarm-LCD-8GB - Manual (Page 13)

12
1. Turn on the LCD screen.
2. Turn on your Video Alarm Clock.
3. Press
the “Motion” button on your Video Alarm Clock to
start recording when motion is detected. The LED
indicator will turn flash red to indicate that it is recording.
4. While the Video Alarm Clock is recording, the LCD screen
can be switched On/Off.
5. To stop recording, press the
“Motion” button on your
Video Alarm Clock once. The LED indicator turns green
when recording stops.
The Video Alarm Clock will automatically shut down
when memory card is full.
Chapter 10: Recording Videos (Motion Detection)
Prior to recording any videos, make
sure that the memory card is properly
inserted into the Video Alarm Clock.