Chapter 8: camera installation – Night Owl X9-88-2TB user manual User Manual

Page 20

Chapter 8: Camera Installation

8.2 Mounting the Cameras

1. Choose a location: Decide where you would like to mount the

camera.

2. Indicate screw positions: Mark three holes on the surface where

you plan to mount the camera, using the holes in the camera base

as a guide.

3. Anchor screws: Using a drill bit slightly smaller than the included

screw anchors, drill into the mounting surface using the guide

marks you placed in the previous step. Insert the screw anchors.

4. Mount the camera: Hold the camera in place and tighten each

screw securely into the anchors.

5. Make sure the camera is secure: Once the camera's mount is

screwed in place, make sure that the camera is securely mounted

by placing gentle pressure on the mount.

6. Adjust the camera position: Adjust the camera housing to point

the camera lens in the direction you would like to record.

Don’t feel like installing the system yourself?

Let InstallerNet do the work for you.