Dee Zee DZ760086 - Manual

INSTALLATION INSTRUCTION
PART# DZ 760086
Page 1of 4
NOTICE:
 The figures here are for reference only and may have differences with the actual product you received, however they share
the same assembly way.
 Please read the instruction completely for easy installation, which will also help you to avoid scratches or other potential
damages to your appealing car.
 Please periodically check and retighten all the hardware and clean the investment for a refresh look.
PARTS LIST:
No. Name Qty Remarks No. Name Qty Remarks
○
1 Platform Halves 2 ○
13
Flat Brace 1
○
2
Bike arm assembly 2 1
○
14
Connecting
Plate
2
○
3 Bike arm assembly 1 1 ○
15 Carriage bolt 12 3/8"-16*3/4"
○
4 2” Square Tube Bracket 1 1 ○
16 Carriage bolt 2 3/8"-16*3-1/4"
○
5 2” Square Tube Bracket 2 1 ○
17 Locknut 14 3/8"-16
○
6 Bridge Supports 2 ○
18
Locknut 2 M6
○
7 Safety clip 2 19 Philips Screw 2 M6x20
○
8 Pin 2 1 20 Bolt 1 5/8"-11*2-3/4"
○
9 Pin 1 1 21 Locknut 1 5/8"-11
○
10 Bike Arm Connecting plate 1 22 Pin 3 1
○
11
split pin 3 23 Bolt 1 1/2"-13*2-7/8”
○
12
Reflector 2 24 Nut 1 1/2"-13
1 2 3 4 5 6 7 8 9 10 11 12 13 14
ASSEMBLY PROCEDURE:
Step 1：
Check all the contents are available in accordance with the above list.
Step 2： Place each half of the platform assembly (○
1 ) with the open ends facing each other, align holes on connection plate
○
14 and platform○
1 , insert three carriage bolts○
15 , and fasten locknuts○ 17 (fig.1). Note: The bolt should be placed with the
rounded end on the outside of the platform, with the nut on the inside of the platform. This is the only way that the bolts will
tighten properly, the effect as fig.2.