Dee Zee AR8170B - Manual (Page 9)

TOOL BOX LATCH ADJUSTMENT
NOTE: TOOL BOX LATCH WAS PRESET AT THE FACTORY. MAKE SURE THE LATCH IS ADJUSTED TO
THAT OF YOUR DESIRED SEAL.
ALSO, PERIODIC ADJUSTMENT MAY BE NEEDED OVER TIME.
PLEASE REFER TO LATCH ADJUSTMENT INSTRUCTION BELOW.
1.
Keeping the striker plate perpendicular to the lid, adjust the striker location left and right to
align the pin with the latch as shown below. The dot identified by the arrow shows the
preferred location of the striker pin.
2.
When the striker pin is correctly centered, tighten top bolt to set the location.