Dee Zee DZ95730 - Manual (Page 6)

Page 6 of 12
DZ 95730 2/18/13
6
Tailgate installation is a reverse process of removing the
factory tailgate. Slide driver side tube hinge of the tailgate
on to the mounting pin of the bed. Lay back tailgate 30-45
degrees until notch in passenger side tailgate hinge is
parallel with the mounting pin. Slide tailgate hinge on to
mounting pin of the bed. Reattach cables to bed mounting
points. Close Tailgate.
Remove Tailgate from vehicle following
procedure in step 1. Remove hardware shown
to the right. Passenger side shown.
A
A
5 Tailgate Installation
*Due to variations in the beds and tailgates of the trucks
tailgate latches may not hit the striker on the truck
correctly. The following is the procedure to adjust the
latch brackets on the tailgates.*
Optional – Latch Bracket Adjustment
1/2”
3/16”