Dee Zee DZ17221 - Manual (Page 7)

Insert the plastic spacer [M] and plastic spacer with notch [N] into the tubes on the lower truck brackets.
The spacer with the notch goes in the tube with the notch. Align the spacer notch with the notch
in the tube
For some model years of Chevy
trucks, it may be necessary
to use an additional spacer on this side.
This spacer is included in the kit.
Measure the drivers side post shown
in the next step and compare that
measurement to the inside diameter.
If the post will fit in the thicker spacer,
then install both in this step.
6
6 of 15 5/22/2013