Dee Zee DZ951601 - Manual (Page 3)

WRENCH UTILITY KNIFE OR SCISSORS
9/16"
7/32" ALLEN WRENCH OR SOCKET
RATCHET
Peel a portion of the paper back from the adhesive on the foam gasket [F].
Apply the sticky side of the gasket to the bottom of the rack assemblies and bungee boxes (if applicable).
Use the lip on the bottom side as a guide to apply the gasket straight with the part.
TOOLS REQUIRED
1
ALIGN GASKET
WITH THIS
EDGE
After applying the gasket, use a utility knife to trim the gasket with the end of the part.
TRIM AT EDGE
Invis-A-Rack 2 of 15 3/6/2013