Dee Zee RAM-VB-143-SW1 - Manual

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
SPECIFICATIONS
Placement
Attaches between seat frame and floor
board. Uses front and rear, inside seat
studs.
Drilling Required
No - uses existing seat bolts
Seat Configuration
Bucket
Construction/Finish
Steel/Black Powdercoat
Dimensions
Tools required for base installation
2 qty ½”box end wrench’s, 18 mm deep, 15mm
deep sockets, and socket wrench for base
installation . Tools for complete system
assembly: pliers, phillips screw driver, #10,
½”,
9/16” box end wrench’s.
A = 13.75", B = 7.625", C = 17.625"
Hole Centers = 11.687”
Pole or Pedestal
Included on Base
Weight
6.1 lbs.
Features
Complete system
shown in use
RAM-VB-143
Misc.
Installs in minutes with no drilling required
Stabilizer bracket included
Rock solid construction
Lifetime warranty
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-143
GMC SAVANA VAN (2001-NEWER)
CHEVROLET EXPRESS VAN (2001-NEWER)
RAM-VB-143SL
shown attached