Dee Zee RAM-VB-109A-SW1 User Manual
Ram no-drill, Seat bases, Vehicle base for the
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
SPECIFICATIONS
Placement
Passenger side floor board, under seat
Drilling Required
No - uses existing seat bolts
Seat Configuration
Bucket/Bench
Construction/Finish
Steel/Black Powdercoat
Tools required for base installation
15mm socket for base installation and ½”box
end wrench for riser attachment . Tools for
complete system assembly: pliers, phillips
screw driver, #10, ½”,
9/16”
box end
wrench’s.
Features
RAM-VB-109-SW1
Misc.
Installs in minutes with no drilling required
Step feature allows optimized placement of mount with a minimal
intrusion of passenger leg space. If vehicle has slide out cup holder,
RAM-VB-109A kit is suggested.
If vehicle has slide out cup holder, consider the RAM-VB-109A kit. The
adjustable riser allows for easier access to the slide out cup holder.
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-109 & 109A
FORD F-150 (2004-2010)
LINCOLN MARK LT (2005-NEWER)
RAM-VB-109A-SW1
The RAM-VB-109A-SW1 is the preferred
kit for the Ford F-150 (2009-2010)
RAM-VB-109
RAM-VB-109A
Vehicle Base
Vehicle Base