Dee Zee DZ501515 - Manual (Page 6)

GRILLE GUARD
07-12 SILVERADO 1500
Page 5 of 5 12/18/12 Rev1(DP)
Driver Side Mounting Bracket Installation Pictured
Fig 9
(Fig 11) Driver side Top Bracket installation pictured
without foam for instruction purposes only
Front
Front
Front
Factory bumper
bracket bolt
(1) 10mm Button Head Bolt
(2) 10mm Flat Washers
(1) 10mm Nylon Lock Nut
Use a pair of needle nose pliers
to carefully pinch the top and
bottom tab on the clip to release
and remove the grille
Complete Installation
(Fig 10) Apply adhesive backed Foam
Tape to inner and outer surface of Top
Brackets to protect factory bumper
(Fig 12) Driver side Top Bracket installation
pictured. Apply foam tape to Bracket. Apply
a layer of masking tape to the top of the
bumper for protection during installation