Dee Zee DZ17940 - Manual (Page 5)

3 Mark the Wheel Well Liner flush with the bottom of the fender. Cut the extra
Wheel Well Liner off. This needs to be done for Option #1 only.
Mark and cut flush.
4 Place the mudflap up to the wheel well, over the wheel well liner. Insert the top two
screw and washer from Step #1 into the holes. Insert in the bottom hole a 1/4” X 1”
Phillips Head Screw (B) and 1/4” Fender Washer (C) then place a 1/4” Flat Washer (E)
and 1/4” Nut on the 1/4” X 1” Phillips Head Screw (B).
Re-use the screws and
washer removed in step
#1
B C D E
Note: Use large washer on
this side of mudflap
Option # 1