Dee Zee DZ2545 - Manual (Page 8)

Place the running board on the angle braces. Adjust the board to make sure that it is
straight with the vehicle. The outside edge of the board should sit about 1/4" away from the edge
of the brace. Make sure that the holes in the brace line of with the flanges on the board.
Set the front of the board 2" from the front wheel well.
8
Set the front of the board 2" from the front wheel well.
Once the board is in the proper location, clamp the running board to the angle braces.
DZ 2545 6 OF 7 10/14/2011