Dee Zee DZ16316 - Manual (Page 10)

Place the tube on the braces as was done in Step 3 for the drivers side.
Adjust the front brace to align with the slots in the bottom of the tube, depending on vehicle build
variation, this may require the brace to angle towards the rear of the vehicle.
Once the brace location is set, torque the front body shock mount bolt to 44 ft-lbs plus a 170 degree turn.
Repeat steps 4 and 5 for the passenger side tube.
Make sure all bolts in this installation have been tightened.
8
8 of 8 2/7/2013