Dee Zee DZ17007C - Manual (Page 4)

Page 4 of 7
DZ 17007 02/13/09
Driver Side Nerfstep:
Place the front Driver side brackets (C) in all three locations onto the driver side nerfstep (A)
as shown and secure into place using the 6mm hex flange bolt (H) and 6mm washer (I). Leave
loose for later adjustment. Note: The cradle part of the mounting brackets will face towards
the rear of the nerfstep.
`
Passenger Side Nerfstep
Place the front Passenger side brackets (D) in all three locations onto the driver side nerfstep
(A) as shown and secure into place using the 6mm hex flange bolt (H) and 6mm washer (I).
Leave loose for later adjustment. Note: The cradle part of the mounting brackets will face
towards the rear of the nerfstep.
1
2
C
C
C
A
A
D
D
D